1. Try to avoid bumps during transportation of the safety cabinet to prevent surface damage and rusting of the cabinet.
2. At ordinary times, pay attention to protect the cabinet to prevent collision, scratching or splashing of corrosive chemical liquids on the cabinet, so as not to damage the cabinet or damage the coating on the cabinet.
3. After opening the door, pay attention to closing and locking. It is strictly forbidden to open the cabinet door for a long time to avoid fire sources from entering the cabinet.
4. It is strictly forbidden to smoke, throw fireworks or discard other burning objects in the place where the cabinet is stored.
5. At night or under dark conditions with insufficient light, if you need to place objects in the cabinet or perform other operations, you should turn on the surrounding lights or carry an explosion-proof flashlight for operation.
6. The floor where the safety cabinet is placed should be kept dry to prevent moisture and alkalization.
7. It is strictly forbidden to put strong corrosive chemicals in the metal safety cabinet. Strongly corrosive chemicals should not be placed in the same cabinet as flammable and combustible chemicals. Special strong corrosive chemical cabinets should be purchased for classified storage.
8. The surface of the cabinet should be kept clean. If the surface is not clean, please wipe it with a soft cotton cloth or towel.
9. Use the correct method to unlock the lock to avoid damage to the lock body, and regularly check whether the lock switch is in good condition. The switch cabinet door should be opened and closed gently to avoid violent impact. Don't knock the lock with hard objects.
10. The metal safety cabinet should be far away from heat sources or other heat-generating instruments and equipment, and avoid direct sunlight. The place where the metal safety cabinet is placed should be far away from fire sources, and away from splashing chemical liquids or residues.
11. It is recommended to check the grounding of the safety cabinet at an interval of 3 months to avoid loose or aging fasteners leading to poor grounding.
12. Sump disposal: If leaked liquid flows into the sump, please recycle the waste as soon as possible and clean the sump.
13. It is recommended to check the flame arresters on the left and right sides of the safety cabinet once every 6 months to avoid blockage.
14. The items placed on the shelf of the cabinet should not exceed the load-bearing limit of the shelf. If the shelves have multiple layers, when placing items, place larger or heavier items on the lower shelves, and place smaller or lighter items on the upper shelves.
15. Any locking arrangement installed on the body must be managed by a special person, and it is strictly forbidden to open it by non-management personnel.
